Product Description & Reviews
Product Information Power supply: DC 12-24V Output power: 100W x 2 Input impedance: 51K x 2 Power efficiency: >90% Output Speaker impedance: 4-8 ohm Frequency: 14-100KHz SNR(signal noisy ratio):100db Output channel: Left channel & Right channel Size: 105mm*65mm*23mm(Length*Width*Height) Advantage of the Digital Amplifying: 1. Up to 90% efficiency, high power; low consumption; strong resistivity for AM; 2. Comprehensive protection: short-circuit/over-heat/over-pressure and direct current; 3. High Resolution and low distortion; provide defined trebles and deep bass; 4. No need to considerate about the problem of internal resistance when matching with the speakers; 5. Instead of analog amplifier, digital amplifier can avoid transient intermodulation distortion efficiently Wiring instructon: 1. Make sure the correct wiring before connecting the amplifier board; 2. Speaker wiring: connects speaker "+" to Lout "-", connects speaker "-" to Rout "-"; 3. Connect the audio input wire; 4. Power on the amplifier board after confirming the wiring. Remember to unplug the power if you want to change the wiring or move the board. Note: 1. Power supply cannot be connected to the output interface of the speaker, otherwise the chip will be damaged; 2. Please mount install this amplifier board on somewhere without metal and other conductive objects to avoid causing short circuit or current sound; Package include: 1 x TPA3116 100W+100W Digital Power Amplifier Board
Features & Highlights
- Operating voltage range: DC 12-24V(maximum voltage is no more than 24V); LED indicator; logical and delicate circuit layout; ON/OFF volumn adjustment knob
- Up to 90%, high power efficiency, high power; low consumption; strong resistivity for AM; comprehensive protection: short-circuit/over-heat/over-pressure/direct current and low voltage
- With 3.5mm audio input jack and 3-pin audio input port; 3 wiring columns(Left->for left channel output 10-100W; middle->DC 12-24V power supply; right->right channel output 10-100W)
- Dual output channel, the maximum output power can reach 100W+100W; this digital audio amplifier board applies to laptop power supply; battery and vehicle battery(DC 12-24V, power supply which more than 100W is recommended)
- Dimention: 105mm(Length)x 65mm(Width)x 23mm(Height); perfect size of the amplifier board which will not take you too much room and it is easy to install
Additional Information
| Manufacturer: | Yeeco |
| Brand: | Yeeco |
| Model: | 1600047 |
| Part Number: | Y1600047 |
| Publisher: | Yeeco |
| Studio: | Yeeco |
| MPN: | Y1600047 |
| Package Weight: | 0.2 pounds |
| Package Size: | 4.65 x 1.1 x 1.1 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.