Waveshare 4.3inch HDMI LCD Resistive Touch Screen 480272 High Resolution Display Designed for Raspberry Pi Zero/A+/B/B+/2 B/3 Model B

4.3inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Features 480*272 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Back light control to lower power consumption Development Resources Wiki:http://www.waveshare.com/wiki/4.3inch_HDMI_LCD" FAQ Why the LCD doesn't work with my Raspbian? --To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? --Make sure the hardware connection is correct and connects fine. -- Make sure the image in TF card is burnt correctly. --The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use? --It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD. For more info, please check the wiki page. Package Contains 4.3inch HDMI LCD x 1 HDMI connector x 1 Touch pen x 1 RPi screws pack (4pcs)x 1

Browse Our Catalog.

View More In Motherboards.