vanpower Development Board for WeMos D1 ESP-12F ESP8266 Motherboard Module Board

Features:1. The 5 Digital pins can configure the write/read/interrupt/pwm/I2C/one-wire supported separately.2. Operation and NodeMCU consistent, adding a programmable LED, you can use GPIO16 to control, display 8266 running status and other functions. Integrated OLED and five button, more convenient for development.3. The design concept originates from the open source project NodeMCU, and the development board integrates 18650 charging and discharging systems with charging and discharging protection. At the same time, a OLED and five directional buttons are integrated to facilitate the development.Specification:Model: ESP-8266Color: BlackCharging Protection: YesDischarge Protection: YesCompatible for ArduinoCompatible for NodeMCUWide Voltage Input Range: 5V~12VCharge Current: 500 mASize(L*W*H): approx.102 x 30 x 20 mm/4.01 x 1.18 x 0.78''Display Size: 0.96 InchWarm Tips:1. This product does not contain 18650 batteries.If the battery is in the wrong direction, the charging chip will be destroyed.2. Please do not burn the program during charging. When you burn the program, please unplug the battery and verify the switch is in ON position.3. Recommend the use of 5V 500mA charging charger, more than 5V 1A there will be fever, does not affect the normal work, but in the process of charging charging chip do not touch or carry, the measured charge charging will rise to about 60 degrees with the diode chip, no heat during normal working hours, rest assured to carry.Note: Please allow 1-3mm differs due to manual measurement.Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding. Package included:1 x ESP8266 Motherboard Module

Browse Our Catalog.

View More In Motherboards.