Toogoo 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864
Toogoo 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864 by Toogoo at The Connectors Book. MPN: 167690. Hurry! Limited time offer. Offer valid only while supplies last. * TOOGOO is a registered trademark. ONLY Authorized ller of TOOGOO can ll under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864Mega 2560 control board: core microcontroller development board itlf has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 ts of simulation than the input side, group 4 UARTs (hardware rial ports), using the 16 MHz
Product Description & Reviews
* TOOGOO is a registered trademark. ONLY Authorized ller of TOOGOO can ll under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864Mega 2560 control board: core microcontroller development board itlf has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 ts of simulation than the input side, group 4 UARTs (hardware rial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery.MicrocontrollerATmega2560 Operating Voltage: 5VInput Voltage (recommended): 7-12VInput Voltage (limits): 6-20VDigital I/O Pins: 54 (of which 15 provide PWM output)Analog Input Pins: 16DC Current per I/O Pin: 40 mADC Current for 3.3V Pin: 50 mAFlash Memory: 256 KB of which 8 KB ud by bootloaderSRAM: 8 KBEEPROM: 4 KBClock Speed: 16MHzPCB Heatbed MK2B Dual PowerThis is the later version of MK2B, and can u dual power input, so it is better than MK2A.Dimensions (Outer): 214mm x 214mmDimensions (Heat Bed): 200mm x 200mmLaminate FR4 1.6+/-0.15mm2 Layer, 35um CopperPower Input: 12V/24V DCCopper Plated Holescolour: blue & redMaterial: metalPackage included1* Mega 2560 R3 1* LCD 12864 Graphic smart display controller3* Mechanical endstops + cables1* MK2B Heatbed1* Thermistor and high temp wire1* 2M GT2 belts2* 30cm Cable1* Smart adapter1* USB cableOnly the above package content, other products are not included.
Features & Highlights
- 3D Printer Controller RAMPS 1.4: The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion.
- The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
- LCD 12864 Graphic Smart Display Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller.
- Print your 3D designs without PC, just with a g-code design stored on the SD card.3 pcs of Mechanical End stops: The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin .pitch header and accepts a standard, old-style CD-ROM audio connector cable.
- 2M GT2 Belts: For 3D Printing applications, GT2 2mm belt system works better than T2.5, T5, it gives better smoothness and accuracy of positioning, resulting in better printing quality. GT2 timing belt system especially suited for linear movement and positioning applications.
Additional Information
Manufacturer: | TOOGOO |
Brand: | Toogoo |
Color: | blue & red |
Model: | 167690 |
Part Number: | 167690 |
Publisher: | TOOGOO |
Studio: | TOOGOO |
MPN: | 167690 |
EAN: | 4894681222129 |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By SODIAL
mpn: 167690, ean: 0192948272264,
By Softmusic
mpn: 6OXDAV00K00SZJ254MG, ean: 8710175242397,
By BephaMart
mpn: 101, ean: 0649152374968,
By Laser Xperts Inc
mpn: 5851-5997, ean: 0768855214019,
By Smead
mpn: SMD14033, ean: 0086486140331,
By HP
sku: RK20163000CN-6059950, mpn: 4297, ean: 0000886176301,
By HP
sku: CH955-67115, mpn: CH955-67115, ean: 5704327963844,
By HP
mpn: CE707-67907, ean: 0783583626736,
By HP
mpn: RK2-4077-000CN, ean: 4054842631263,
By HP
mpn: RM1-2355-000CN, ean: 4054842632000,