Product Description & Reviews
The IOIO-OTG is a board which allows you to quickly and easily interface electronic circuits to an Android device or a PC: Connect the IOIO-OTG to the Android / PC using USB or Bluetooth. Power the IOIO-OTG (not required if operating in USB device mode, see below). Connect your circuits to any of the 46 I/O pins available on the IOIO-OTG. You can power your circuits off of the IOIO-OTG too. Write a Java program to control the I/O pins, using a high-level API using the provided libraries. Power Supply The IOIO-OTG can be powered in one of two ways: By supplying 5V-15V to its JST connector. Do not exceed 10V if using long wires between the power supply and the IOIO-OTG or you might damage the board. I/O Capabilities The IOIO supports a wide range of commonly used hardware interfaces, all of which can be use concurrently: 46 GPIO pins (digital input / output). Internal pull-ups / pull-downs / open drain mode are supported on all pins. 21 of which are 5V-tolerant. 16 analog inputs (use on designated pins). 9 PWM outputs (use on any pin marked "P"). 3 UART buses (use on any pin marked "P"). 3 I²C buses (use on designated pins). 3 SPI buses (use on any pin marked "P"). 6 pulse input channels for measuring pulse width and frequency - 3 single-precision + 3-double precision (use on any pin marked "P"). 16 capacitive sensing inputs (use on analog pins). Precision motor control - up to 9 steppers / servos / DC motors and digital outputs with precise timing, pulse counts and synchronization (coming soon with a firmware upgrade).
Features & Highlights
- All the following connection modes are supported: Connecting to Android, IOIO acting as a USB host.
- Connect the included USB-OTG cable to the IOIO, then use a standard USB cable to connect the Android device. For working with older Android devices (down to Android V1.5!), make sure to enable USB debugging on the Android. In this mode, the IOIO charges the Android.
Additional Information
Manufacturer: | Seeedstudio |
Brand: | seeed studio |
Part Number: | 1 |
Publisher: | Seeedstudio |
Studio: | Seeedstudio |
MPN: | 1 |
UPC: | 720405480282 |
EAN: | 0841454105992 |
Item Size: | 1.97 x 0.39 x 0.39 inches |
Package Weight: | 0.18 pounds |
Package Size: | 2.7 x 0.5 x 0.5 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.