Samlex America (SDC60) 60 Amp DC Converter

Samlex SDC-60 Switching Mode Step-Down DC-DC Converter, 60A Continuous Output Current, 70A Peak output current, Advanced switch mode design, Mount in almost any location This high efficiency switch-mode step-down DC-DC converter converts an input voltage of 24 VDC nominal (range 20 VDC to 35 VDC) to a highly regulated output voltage of 12 VDC nominal (13.8 VDC) at 60 Amps. The SDC-60 DC-DC converter is non-isolated (no galvanic isolation between input and output) and meant for use in negative ground systems. Features include overload, over-heating, reverse polarity and over-voltage protection. Key Features Advanced switch mode design Mount in almost any location Compact and light weight Reverse polarity protection High efficiency Cycle by cycle current limiting circuit Overvoltage protection Short circuit protection Specifications Input To Output Isolation: Not isolated. Input and output connections have a common negative Input Voltage: 20 to 35 VDC Output Voltage: 13.8 VDC ± 0.1 V Output Voltage Regulation: 3% Input Current At No Load: < 50 mA Output Ripple And Noise: less than 50 mV RMS Efficiency: ~ 92% Operating Ambient Temperature: - 20° to + 30°C (derate linearly to zero at 70°C) Humidity: Max. 95%, non condensing Input/Output Connections: Terminal Block - 6.3 mm male flat tab, quick connect Dimensions: 3.5" x 3.6" x 7"/90 x 93 x 177 mm Weight: 2.6 lbs/1.2 kg

Browse Our Catalog.

View More In Batteries, Chargers & Accessories.