Product Description & Reviews
Why do you need the Heated Bed Power Module? If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive current during times which may burn the connectors on the controller board. If you need anything greater or equal to 15A this module is a must! For example, if your total power usage is 240W and you have 12V power supply, then it means at least 20A is needed (20X12=240W). As ChiTu controller board is only capable of 15A this setting will not work. To make it work, you need this extra power module. Specification Size: 6 x 5 x 3.1cm / 2.36 x 1.97 x 1.22" Mounting holes: 3.2mm diameter, for M3 screws. Max Current: 25A (Enhance heat dissipation) safe for prolonged times. ensure active cooling of the heatsink. This module is based on power MOSFET and will allow PID control of the heated bed (DC-DC Relays usually do not allow this) Note: 1.This module under the premise of normal cooling, found at I (Max) = 25A stable work situation, the process of using the current not exceed 25A. 2.Please double-confirm the wire you connect is right when installing this MOSFET Board, if you have any issue please contact us firstly, thanks! Package includes: 2 x Heated bed power module (motherboard is not included) 2 x Signal wires 4 x Power cords 4 x Hot bed connect wires 8 x Connecting terminal
Features & Highlights
- [Heat Bed Mosfet Set] 2 x Heated bed power modules (motherboard is not included) 2 x Signal wires, 4 x Power cords, 4 x Hot bed connect wires, 8 x Connecting terminal
- [Multifunction Module] Completely solve the hot bed power is too large and load current problems,and can well protect the connectors on the controller board from overheating
- [Widely Compatible] The high power module is a general add-on heated bed power expansion module for 3D printer. It can work with the Anet A8, Creality cr-10s and most 3d printers
- [Offer Protection] With this add-on module to your controller board, you can lead the maximum current up to 25A. If you need anything greater or equal to 15A this module is a must!
- [Note] Under the condition of normal cooling, it works stably under I (Max) = 25A, the current must NOT exceed 25A during the working process
Additional Information
Manufacturer: | ofnmy |
Brand: | ofnmy |
Part Number: | HSUS037 |
Publisher: | ofnmy |
Studio: | ofnmy |
MPN: | HSUS037 |
UPC: | 750440597850 |
EAN: | 0750440597850 |
Package Weight: | 0.25 pounds |
Package Size: | 3.94 x 1.57 x 1.57 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.