MagiDeal CNC Shield Board+A4988 Stepper Motor Driver+Heatsink For Arduino V3 Engraver

Super Savings Item! Save 38% on the MagiDeal CNC Shield Board+A4988 Stepper Motor Driver+Heatsink For Arduino V3 Engraver by MagiDeal at The Connectors Book. MPN: STK0160006395. Hurry! Limited time offer. Offer valid only while supplies last. Description: - Use removable A4988 or DRV8825 compatible stepping driver. - The extension board can be used for engraving machine or 3D printer driver. - Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal. - PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4). - Compact design, stepping motor can connect connectors or be soldered.

Product Description & Reviews

Description: - Use removable A4988 or DRV8825 compatible stepping driver. - The extension board can be used for engraving machine or 3D printer driver. - Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal. - PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4). - Compact design, stepping motor can connect connectors or be soldered. - Size: Approx. 6.8x5.2cm/2.68x2.05inch; 2x1.5cm/0.79x0.59inch; 6.8x 5.3cm/2.68x2.09inchSpecification: - CNC Expansion Board: - Version: V3.0 - Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply) - 4pcs A4988 Driver: - Thermal Shutdown Circuit: Yes - Cross Current Protection: Yes - Ground Fault Protection: Yes - Short Circuit Protection: Yes - Compatible Logic Voltage: 3.3V and 5V - Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16 - Mix with slow current attenuation model. - Internal UVLO and low RDS (on) output. - Automatic current attenuation mode Detection/Select. - Phase-in rectifier, low power consumption. - Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver. - 4pcs Heat Sinks: - Color: WhitePackage Includes:1 piece of CNC V3 Shield4 piece of Stepper Drivers4 piece of Heatsinks

Features & Highlights

Use removable A4988 or DRV8825 compatible stepping driver.
The extension board can be used for engraving machine or 3D printer driver.
Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal.
PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).
Compact design, stepping motor can connect connectors or be soldered.

Additional Information

Manufacturer:	MagiDeal
Brand:	MagiDeal
Model:	STK0160006395
Part Number:	STK0160006395
Publisher:	MagiDeal
Studio:	MagiDeal
MPN:	STK0160006395
UPC:	800265539532
EAN:	0800265539532

Browse Our Catalog.

View More In Desktop Barebones.

Have questions about this item, or would like to inquire about a custom or bulk order?

If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.