Product Description & Reviews
GPS Specs: - Receiver type 72-channel u-blox M8 engine - GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 - SBAS L1 C/A: WAAS, EGNOS, MSAS - Galileo-ready E1B/C (NEO-M8N) - Nav. update rate1 Single GNSS: up to 18 HZ - Concurrent GNSS: up to 10 Hz - Position accuracy2 2.0 m CEP - Acquisition2 Cold starts: 26 s - Aided starts: 2 s - Reacquisition: 1.5 s - Sensitivity2 Tracking & Nav: -167 dBm - Cold starts: -148 dBm - Hot starts: -156 dBm - Assistance AssistNow GNSS Online - AssistNow GNSS Offline (up to 35 days)3 - AssistNow Autonomous (up to 6 days) - OMA SUPL & 3GPP compliant - Oscillator TCXO (NEO-M8N/Q), - Crystal (NEO-M8M) - RTC crystal Built-In - Noise figure On-chip LNA (NEO-M8M). Extra LNA for - lowest noise figure (NEO-M8N/Q) - Anti jamming Active CW detection and removal. Extra - onboard SAW band pass filter (NEO-M8N/Q) - Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N) - Supported antennas Active and passive - Odometer Travelled distance - Data-logger For position, velocity, and time (NEO-M8N) - Operating temp. -40° C to 85° C - Storage temp. -40° C to 85° C (NEO-M8N/Q) - -40° C to 105° C (NEO-M8M) - RoHS compliant (lead-free) Package includes 1x Ublox NEO-M8N GPS Module Built-in Compass 1x GPS bracket Important note:If you use the Pixhawk flight controller,you need to add the 6pin connector as picture shows,and when you use and calibrate the compass if you connect to the APM flight controller,you need to remove the jumper wire on APM. Please contact me if there is an issue with ths GPS unit,thank you.
Features & Highlights
- GPS NEO-M8N with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy,support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol and mode or more.
- Receiver type 72-channel u-blox M8 engine
- Built-in compass;It supported antennas Active and passive
- Default 5P plug for APM , and comes with a 6P plug ,you can change it for Pixhawk .
- If you use the Pixhawk flight controller,you need to add the 6pin connector as picture shows,and when you use and calibrate the compass if you connect to the APM flight controller,you need to remove the jumper wire on APM.
Additional Information
| Manufacturer: | Hobbypower |
| Brand: | Hobbypower |
| Part Number: | H9944 |
| Publisher: | Hobbypower |
| Studio: | Hobbypower |
| MPN: | H9944 |
| UPC: | 712096470444 |
| EAN: | 0712096470444 |
| Package Weight: | 0.21 pounds |
| Package Size: | 3.15 x 1.97 x 1.97 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.