Product Description & Reviews
Backup camera uses 1/4" extra-sensitive sensor CMOS specially configured for operation in low light conditions - have no "blue" noise, very clear and bright image at night, in poor visibility, in rain or fog.The video signal format switching function allows using the camera in PAL or NTSC. It 10s switch on timer activated when the engine starts and 10s switch off delay activated when the reverse gear is disengaged. Gazer backup camera has an extra-wide 175° viewing angle and is absolutely free from geometric distortions thahks to special optics with an anti-reflective glass lens. The option to disable parking guide lines and image mirroring allows using the backup car camera both for rear and front view. Car backup camera is compatible with Gazer CAxxx mounts and can be installed instead of license plate light. Gazer mounts are identical with original license plate lights and use the original lamp of license plate light or LED backlight with 2700K warm light. Vehicle backup camera installation is easy and considered. The control and commutation unit for plug&pluy installation included. It consists with special power cable with relay block and LC-filter, commutation unit, wiring (26.2 ft), additional cable with power jack and RCA video out - to plug&play monitor connection. Due to the considered connection, there are no conflicts with the vehicle's electrical system when using the backup camera. Specifications: Sensor CMOS 1/4"; PAL 720x576, NTSC 720x480 Resolution PAL 540TVL, NTSC 500TVL Video signal format PAL/NTSC Angle of view 175º Sensitivity 0.1Lux Signal/noise ratio › 46dB Mirror image ON/OFF Guide lines on the image ON/OFF Supply voltage DC 12V Current consumption 85mA Protection level IP67 Operating temperature -30° - +70° C Package Included: 1x Backup Camera 1x Universal Mount 1x Control and Commutation Unit User Manual
Features & Highlights
- Aptina MT139 sensor, special settings for the best night vision mode without IR. Completely sealed with IP-67 grade waterproof & dustproof, works perfectly in harsh conditions - rain, snow, countless car washes, etc.
- Extra-wide 175° viewing angle for maximum visibility behind the vehicle. Special optics with an anti-reflective glass lens that compensates geometric distortions on the image. Ability to switch between PAL and NTSC image formats. Unique distance guide lines on the image help to control the distance to obstacles from any angle. Distance guide lines and image mirroring can be disable that allows using the backup camera both for rear and front view.
- Compatible with Gazer CAxxx mounts - to install the camera instead of license plate light. Find a special CA bracket for your car via gazer.com (more than 300 types of Gazer mount can be installed in more than 3000 cars).
- Pre-activation and deactivation delay function: backup camera switches on for 10 sec when the engine starts and stays on for 10 sec after the reverse gear is disengaged. Special power cable with relay block and LC-filter included. Can be plug&play connected with car monitor Gazer MC125/Gazer MC135 - have RCA video connector and power supply connector for monitor.
- All need cables included, total length of them is 30.5 ft. Car backup camera connector is round with diameter of only 0.2 inch. This allows to lay a cable and to connect a camera even through a very small vehicle hole.
Additional Information
Manufacturer: | Gazer Limited |
Brand: | Gazer® |
Model: | CC155 |
Part Number: | CC155 |
Publisher: | Gazer Limited |
Studio: | Gazer Limited |
MPN: | CC155 |
EAN: | 5060388084356 |
Item Weight: | 0.68 pounds |
Item Size: | 0.92 x 0.92 x 0.92 inches |
Package Weight: | 0.79 pounds |
Package Size: | 5.1 x 2.3 x 2.3 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.