Product Description & Reviews
Shielded solder ring features: Shrinkage ratio 2:1 Hot melt adhesive with waterproof function Hot melt color indicating the applicable size Solder ring design for easy construction Working temperature: -50°-125° Completely shrinking temperature 130° Solder start melting temperature 125° Solder completely melts at a temperature of 150°1: The combination of low melting point alloy and heat shrinkable tube can be used instead of the old method of welding with soldering iron. It can not only protect the contact from air oxidation and corrosive gas, but also prevent the contacts from touching each other. Applied to railways, ships, aerospace, electronics, automotive and other fields. Turns to wire connection, dual solder ring heat shrink protection, waterproof..
Features & Highlights
- 1: The combination of low melting point alloy and heat shrinkable tube can be used instead of the old method of welding with soldering iron. It can not only protect the contact from air oxidation and corrosive gas, but also prevent the contacts from touching each other. Applied to railways, ships, aerospace, electronics, automotive and other fields. Turns to wire connection, dual solder ring heat shrink protection, waterproof.
- 2: Run a wire through the appropriate butt-connected tube size, have wire connection and proper treatment, and connect the solder ring portion of the connector to the wire;
- 3: Both ends of the heat pipe using a hot air gun shrink. The waterproof ring becomes a waterproof ring after heating;
- 4: The hot-welding ring uses a hot air gun until the ring melts and penetrates into the wire connection; the heat-shrink tubing section is heated until it shrinks around the wire; overheating will completely melt the heat-shrinkable tube. The solder ring must be heated to a full melted osmotic line connection.
- 5: Please gradually increase the temperature when you use a hot air gun to heat the wire connector. Do not set the high-temperature heat gun to start heating, or the surface of the wire connector will overheat, which will lead to the tube melting and the solder ring has not melted yet. The temperature is not good, it is too high to burn out. Shielded solder ring features:
Additional Information
Manufacturer: | Elepartpro |
Brand: | Elepartpro |
Part Number: | 100Pcs shielded wire solder heat |
Publisher: | Elepartpro |
Studio: | Elepartpro |
MPN: | 100Pcs shielded wire solder heat |
UPC: | 766008635186 |
EAN: | 0766008635186 |
Item Weight: | 0.14 pounds |
Package Weight: | 0.15 pounds |
Package Size: | 2.72 x 1.14 x 1.14 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.