Product Description & Reviews
Theoretically system can control the fan speed connecting with the red port. The motherboard can read the RPMs of the fan that's plugged into the red port. The speed of the fan connected to the red fan port on this board is controlled by the computer's operating system and NOT manually controlled. The other 9 black fan ports CAN NOT be adjusted in speed. Because one operating system can only control speed of one fan.(The red Port) Operating system control is based on the system detects the temperature of the CPU and other heating devices, automatically adjust the CPU fan speed. the CPU port (the red port) would be the only one that could get controlled by the operating system and then the remaining black ports would just copy the power level of what the red port is at.Package Include:1x HUB1x PWM connector
Features & Highlights
- Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
- In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
- For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
- There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
- RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.
Additional Information
| Manufacturer: | Electop |
| Brand: | Electop |
| Color: | 10 Port Fan Hub Molex Controller |
| Model: | 4328444952 |
| Part Number: | CPUCOOL-1-10-4P |
| Publisher: | Electop |
| Studio: | Electop |
| MPN: | CPUCOOL-1-10-4P |
| UPC: | 785004242846 |
| EAN: | 0785004242846 |
| Package Weight: | 0.2 pounds |
| Package Size: | 2.28 x 0.2 x 0.2 inches |
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.