Ableconn PEXM2-2SA Dual SATA M.2 SSD-HDD Hybrid RAID Controller PCI Express Card - Support 2x M.2 NGFF SSDs + 2x SATA III (6G) Ports

Features * Connector: - 2x B-key (type 22110-D5-B) M.2 socket for M.2 NGFF SATA based SSD - 2x 7-pin SATA connectors - 1 x 4-pin small Molex power connector (optional connection for high power M.2 SSDs) * Chipset: Marvell 88SE9230 * Software: - No driver installation required. The AHCI drivers are natively built-in on most Operating Systems - Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later. * System Requirement: - An empty PCIe x4, x8, or x16 slot. * Supported Modes of Operation: - RAID Modes: hardware RAID 0, 1, 10 (1+0), JBOD - Hybrid Drive (HDD+SDD) Modes: Safe Mode (Mirrored Protection), Capacity Mode (Cost-Optimized) * Port Multiplier: 2x SATA ports support Port Multiplier, but can only use 1 PM at a time. Support up to 4 drives through PM. * Two (2) 6 Gbps SATA III host Ports and two (2) M.2 sockets on board * PCI Express 2.0 x4 Lane Host adapter (electrically a x2 Lane card) low-profile form factor board equipped with a full-profile bracket, and include a low-profile for small form factor computers. * Compliant with 5Gbps PCI Express 2.0 * Fully compliant with Serial ATA specifications 3.0 * Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps * Supports Native Command Queuing (NCQ) as well as ATA and ATAPI commands * Support one (1) FIS-based or Command-based Port Multiplier with up to four (4) drives through PM. The board supports up to seven (7) drives in total. * Three Pin headers on board for LED connection * Movable M.2 NGFF stand-off and multiple plated-holes supports type 22110, 2280, 2260 and 2242 M.2. Supports M.2 NGFF 110mm, 80mm, 60mm, 42mm SSDs. * Operating temperature range: 0 - 60 °C * Storage temperature range: -40 - 75 °C * Fully RoHS compliant * Made in Taiwan

Browse Our Catalog.

View More In I/O Port Cards.